2019 CAT D6N LGP for Sale in Southampton

CAT D6N LGP Weight: 17,380 KGS Hours: 5424 HP: 170
VPAT Blade, Drawbar fitted, Ripper valve, Rippers available at an additional cost.
ENGINE
Blow by- Minimal to none- - - - Knocking- No engine knocking- - - -
Air cleaners- Good as new- - - -
Any smoke- No smoke- - - -
Oil or fuel leaks- None visible- - - - General running condition- Runs well- - - - - -
TRANSMISSION
Gear change- Good change, no sharpness- - - - Steering- Responsive- - - - Oil leaks- None visible- - - -
Is the transmission noisy?- No- - - - Torque converter- Damper feels good- - - - Controls- Good controls- - - - General running condition- Moves well- - - - - -
UNDERCARRIAGE
Shoe width- 835mm- - - - Shoe height- 58mm, 90%- - - -
Shoes any wear in trailing edge- 90%, Wear minimal- - - -
Rail height- 118mm, 70%- - - - Any signs of link failure- No- - - -
Average diameter of pins and bushings- 59mm, 70%- - - - Have pins been turned on chains- Yes- - - - Sprockets- 22mm tips, 72mm Gape, 80%- - - - - -
UNDERCARRIAGE - IDLERS
Left side idler- Good as new, 99%- - - -
Right side idler- Good as new, 99%- - - - - - - UNDERCARRIAGE - TOP ROLLERS
Left side top roller- 180mm x 180mm, 99%- - - -
Right side top roller- 180mm x 180mm, 99%- - - - - - - UNDERCARRIAGE - BOTTOM ROLLERS
Roller 1- 197mm x 197mm 99%- - - -
Roller 2- 197mm x 197mm 99%- - - -
Roller 3- 197mm x 197mm 99%- - - -
Roller 4- 197mm x 197mm 99%- - - -
Roller 6- 197mm x 197mm 99%- - - -
Roller 7- 197mm x 197mm 99%- - - -
Roller 8- 197mm x 197mm 99%- - - - - - - CAB
Cab Mounts - any wear?- No wear- - - -
Any wiring for laser system?- Yes- - - -
Back up alarm- Loud and clear- - - -
Battery isolator switch- Manual and electric- - - -
Lights- All working- - - -
Wipers- All working- - - -
Heater- Good heat- - - -
A/C- Cold- - - -
Seat condition- Good condition, works as should- - - -
Cladding condition- Average condition- - - - Floor matt condition- No wear or tears- - - - Seat belt- Undamaged, working- - - -
Mirrors- Rear view only, undamaged- - - -
Horn- Loud and clear- - - -
Cab glass condition- No cracks or chips- - - - Any perspex fitted- None- - - -
Steps and grab handles secure- All secure and fitted- - - - - -
BLADE
Blade type- PAT- - Blade width- 4080mm- - Blade height- 1280mm- - Main lift rams wear- L/H: 1mm x 2mm, R/H: 2mm x 2-3mm- - Pitch ram wear- L/H: 3mm x 5mm, R/H: 3mm x 4mm- - Tilt ram wear- L/H: 1mm R/H:1mm- - Link bar wear- L/H: 2mm R/H:2mm- - C Frame wear- L/H: 2mm, R/H: 3mm- - Ball joint wear- 12mm- - Equaliser bar wear- L/H: 3mm, Mid: 1mm, R/H: 4-5mm- - Face / Moldboard- Good thickness, no dents- - - - Spill rack condition- Straight- - - - Cutting edges condition- Good as new, 100%- - - -
Have cutting edges been turned?- No- - - -
General blade condition- Very decent blade- - - - - -
RIPPER
Ripper valve fitted?- Yes- - - - - - - - - - PAINT & DECALS
Any damage to panels- No damage to panels- - - -
Paint condition- Good- - - - Condition of decals- To be replaced- - - -
DIMENSIONS- Length
Width
Height- Measurements with blade straight- 5350mm
4080mm
3350mm- Measurements with blade turned- 6210mm
3620mm
3350mm- Measurement from outside to outside of tracks-
3000mm- - Measurements with blade straight- Length: 5350mm
Width: 4080mm
Height: 3350mm- Measurements with blade turned- Length: 6210mm
Width: 3620mm
Height: 3350mm- Measurement from outside to outside of tracks- Length:
Width: 3000mm
Height: