2022 ASHLAND 950XL2

ADDED: June 30, 2022

Machine Details

Sub Category


Sale Type

For Sale







Make Sub Category

Ashland Scrapers

Seller Note

ASHLAND 950XL2 Full inspection sheets available at the Red Bull website - click the dealer logo on the right to view the dealer's contact details.
Ashland hitches are made by inserting a steel thrust block into the neck of a steel, 'C' shaped plate. The yoke system and thrust collar are then placed in their correct positions to be welded 360 degrees around. This design gives Ashland scrapers a full range of motion from the hitch and maximum potential pull-through to the back side of the Pole or the spindle base plate.

Socket System:
The new Control Ball & Socket System creates a perfect link between Gooseneck and Dolly-Pole. After 60 years of Ashland's cast socket halves, we have developed an adjustable socket system. Machined from a solid billet of steel, it guarantees a precision fit at all times while improving the greasing characteristics of the system. As the joint between the ball & socket begins to wear, simply remove shims as needed to tighten the fit on the 4.5? ball.

Front Section:
The Front Sections on Ashland scrapers have a long, paneled Gooseneck design which allows the front section to grab onto the scraper at a better angle. A longer Front Section places the dolly wheels farther away from the 'fall zone' (77' away), so the wheels don't interfere with the machine's ejection process. All supported by industrial welded 4? x 16? vertically mounted lift cylinders.

Front Pipe:
Round structures, such as the heavy wall pipe that Ashland uses in its Front Section, handle torsional loads (twisting loads) much better than square or rectangle tubing. With rounded pipe, the stress of your load is displaced around the entire circumference of the structure ' with any other style, stress is amplified in the corners and seams. Concentrated stress can cause the tubing to fail in these areas, making our Front Section pipe a superior design.

The maximum stroke of the 4' x 13' cylinder and strategic pivot points, allows the Apron to...