2020 CAT D3 LGP for Sale in Southampton

CAT D3 LGP Weight: 9,693 KGS Hours: 2426 HP: 104
Rippers available at an additional cost.
ENGINE
Knocking- No knocking- - - - Air cleaners- Good- - - - Any smoke- No smoke- - - - Oil or fuel leaks- No leaks- - - - General running condition- Runs well- - - - - -
TRANSMISSION
Gear change- HST works well- - - - Steering- Responsive- - - - Oil leaks- No leaks- - - - Is the transmission noisy?- No- - - - Torque converter- Good- - - - Controls- Good tight controls- - - - General running condition- Moves well- - - - - -
UNDERCARRIAGE
Shoe width- 660mm- - - - Shoe height- 40mm, 90%- - - - Shoes - any wear in trailing edge- Minimal- - - - Rail height- 104mm, 95%- - - - Any signs of link failure- No- - - - Average diameter of pins and bushings- 57mm, 95%- - - - Have pins been turned on chains- No- - - - Sprockets- 77mm gape, 18mm tips- - - - Idlers- In good shape, 80%- - - - - -
TOP ROLLERS - UNDERCARRIAGE
Left side roller- 158mm x 158mm, 90%- - - - Right side roller- 162mm x 159mm, 90%- - - - - -
BOTTOM ROLLERS - UNDERCARRIAGE
Roller 1- 172mm x 171mm, 85%- - - - Roller 2- 170mm x 170mm, 85%- - - - Roller 3- 170mm x 170mm, 85%- - - - Roller 4- 170mm x 170mm, 85%- - - - Roller 5- 170mm x 171mm, 85%- - - - Roller 6- Visual only, 85%- - - - Roller 7- Visual only, 85%- - - - - -
CAB
Cab mounts - any wear- Minimal wear- - - - Any wiring for laser system- Yes- - - - Back up alarm- Loud and clear- - - - Battery isolator switch- Manual fitted- - - - Lights- All working- - - - Wipers- All working- - - - Heater- Good heat- - - - A/C- Good A/C- - - - Seat condition- Good condition- - - - Floor mat condition- No damage or wear- - - - Seat belt- Working as should- - - - Mirrors- Rear view only- - - - Horn- Loud and clear- - - - Cab mounts- Good mounts- - - - Cab glass condition- Good condition- - - - Cab glass have any cracks?- No damage / cracks- - - - Any perspex fitted- None fitted- - - - Steps and grab handles secure?- All fitted & undamaged- - - - - -
BLADE
Blade type- PAT blade- - Blade width- 3210mm- - Blade height- 1020mm- - Main lift rams, wear- L/H: 1mm x 1mm, R/H: 1mm x 1mm- - Pitch rams, wear- L/H: 2mm x 2mm, R/H: 2mm x 2mm- - Tilt ram, wear- 2mm x 2mm- - Link ram, wear- 2mm x 2mm- - Ball joint play- 10mm- - C Frame wear- 2mm x 2mm- - Face / moldboard- Good thickness- - - - Cutting edges condition- 30mm- - - - Have cutting edges been turned?- No- - - - General blade condition- Good blade overall- - - - - -
PAINT & DECALS
Paint condition- Fair- - - - Any areas repainted- No- - - - Any rust patches- On edges- - - - Condition of decals- Good condition- - - - - -
DIMENSIONS- Length
Width
Height- Measurements with blade straight- 4280mm
3210mm
2780mm- Measurements with blade turned- 4980mm
2900mm
2780mm- Measurement from outside to outside of tracks-
2405mm- - Measurements with blade straight- Length: 4280mm
Width: 3210mm
Height: 2780mm- Measurements with blade turned- Length: 4980mm
Width: 2900mm
Height: 2780mm- Measurement from outside to outside of tracks- Length:
Width: 2405mm
Height: